Comments on: JLS SCAR Disassembly http://www.mechbox.com/scar/jls-scar-disassembly.html Thu, 07 Jan 2010 22:29:56 +0000 hourly 1 http://wordpress.org/?v=3.0.1 By: Joeri http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-3#comment-1699 Joeri Sun, 06 Sep 2009 16:24:35 +0000 http://www.mechbox.com/?p=83#comment-1699 Hello, is it the same for the D'boys scar? I'm going to replace the spring. This video is very helpful. Grtz Hello, is it the same for the D’boys scar? I’m going to replace the spring. This video is very helpful.
Grtz

]]> By: dotted http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-3#comment-1286 dotted Thu, 18 Jun 2009 04:02:36 +0000 http://www.mechbox.com/?p=83#comment-1286 Hi, I also have an Echo 1 SCAR and I can't figure out how to take the gear box out of the lower receiver. The selector switch and mag release seem to be made to never come out of their places. The exploded diagram on the back of the manual isn't much help. 6mm, If you could help out with this, you would have an exclusive. There doesn't seem to be a single person out there who knows how to do this and wants to share it. I looked EVERYWHERE. If some one else has already done this, and I can't find it PLEASE let me know. (I'm getting a little desperate) Hi, I also have an Echo 1 SCAR and I can’t figure out how to take the gear box out of the lower receiver. The selector switch and mag release seem to be made to never come out of their places. The exploded diagram on the back of the manual isn’t much help. 6mm, If you could help out with this, you would have an exclusive. There doesn’t seem to be a single person out there who knows how to do this and wants to share it. I looked EVERYWHERE. If some one else has already done this, and I can’t find it PLEASE let me know. (I’m getting a little desperate)

]]> By: johnny http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-1275 johnny Tue, 16 Jun 2009 03:39:14 +0000 http://www.mechbox.com/?p=83#comment-1275 i need some help getting my echo1 SCAR apart can you guys make a video to show how i need some help getting my echo1 SCAR apart can you guys make a video to show how

]]> By: R7 http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-1251 R7 Thu, 11 Jun 2009 04:55:59 +0000 http://www.mechbox.com/?p=83#comment-1251 Hi, I am very sure the G36 has a v3 mechbox. v3's are stronger than v2's (which is what- I think- an SCAR has. I would definitely upgrade before sticking a lipo into a JG/ JLS! If you go tightbore, get a JBU for lower priced barrel, or the best- EdGI, PDI, or Prometheus. You can buy from Redwolf airsoft (UK/ Hong Kong). R7 Hi,
I am very sure the G36 has a v3 mechbox. v3′s are stronger than v2′s (which is what- I think- an SCAR has.
I would definitely upgrade before sticking a lipo into a JG/ JLS!
If you go tightbore, get a JBU for lower priced barrel, or the best- EdGI, PDI, or Prometheus.
You can buy from Redwolf airsoft (UK/ Hong Kong).
R7

]]> By: Mel2401 http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-1148 Mel2401 Wed, 20 May 2009 15:42:51 +0000 http://www.mechbox.com/?p=83#comment-1148 Does anybody know what version mechbox is in the JLS SCAR Light and also in the latest JG G36C? Can either of these be upgraded for LiPo ready motors & mechboxes. to upgrade to better quality barrels which should I be looking at and where is a good place to look to buy these parts in the UK? Any help on any of these points would be most welcome. Cheers, Mel Does anybody know what version mechbox is in the JLS SCAR Light and also in the latest JG G36C? Can either of these be upgraded for LiPo ready motors & mechboxes. to upgrade to better quality barrels which should I be looking at and where is a good place to look to buy these parts in the UK?

Any help on any of these points would be most welcome.

Cheers,
Mel

]]> By: Knightwarrier http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-1072 Knightwarrier Sun, 10 May 2009 23:26:59 +0000 http://www.mechbox.com/?p=83#comment-1072 Hey peeps inquiring if this breakdown is similar to the CA Scar, sorry, not even the same gun other than outside appearance. The only thing similar is the motor removal. There are way fewer screws in the CA since the upper body is a one piece machined aluminum. This takedown looks really similar to an M4. Hey peeps inquiring if this breakdown is similar to the CA Scar, sorry, not even the same gun other than outside appearance. The only thing similar is the motor removal. There are way fewer screws in the CA since the upper body is a one piece machined aluminum. This takedown looks really similar to an M4.

]]> By: R7 http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-932 R7 Sun, 12 Apr 2009 03:49:18 +0000 http://www.mechbox.com/?p=83#comment-932 Hi Chris! Make sure the following are done right: 1- No bb is stuck in the barrel (use high quality bb's!) 2- Is the nozzle/ hop unit in workable condition? 3- Do you have a blown fuse inside the small black fuse case in the handguard/ butstock? If not this, then work on the gearbox in these ways!! 1- Check the shimming (is it perfect? This is a very important point!!) 2- Is motor up to the job? 3- Is battery fully charged? 4- Are gears designed to pull such a spring that you're using? If all these are checks, then the gun should work again. However, make sure to lube that barrel frequently! R7 Hi Chris!
Make sure the following are done right:
1- No bb is stuck in the barrel (use high quality bb’s!)
2- Is the nozzle/ hop unit in workable condition?
3- Do you have a blown fuse inside the small black fuse case in the handguard/ butstock?
If not this, then work on the gearbox in these ways!!
1- Check the shimming (is it perfect? This is a very important point!!)
2- Is motor up to the job?
3- Is battery fully charged?
4- Are gears designed to pull such a spring that you’re using?
If all these are checks, then the gun should work again. However, make sure to lube that barrel frequently!
R7

]]> By: Gowzer http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-700 Gowzer Thu, 22 Jan 2009 23:32:26 +0000 http://www.mechbox.com/?p=83#comment-700 The Classic Army SCAR-L is very easy to disassemble if you need to you can go to the CA website and download the manual.The only difficult part is removing the gear box as I'm told I haven't done it on mine yet. The only issue I have is getting a new hop up chamber as mine is messed right up. Does anyone here know if it's possible to get a replacement? Or if there is an after market one that is better? The Classic Army SCAR-L is very easy to disassemble if you need to you can go to the CA website and download the manual.The only difficult part is removing the gear box as I’m told I haven’t done it on mine yet. The only issue I have is getting a new hop up chamber as mine is messed right up. Does anyone here know if it’s possible to get a replacement? Or if there is an after market one that is better?

]]> By: gabriel http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-660 gabriel Tue, 13 Jan 2009 22:45:31 +0000 http://www.mechbox.com/?p=83#comment-660 I have the Classic Army scar-L and i was just making sure this process is the same. I have the Classic Army scar-L and i was just making sure this process is the same.

]]> By: Kyle http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-646 Kyle Thu, 08 Jan 2009 15:16:37 +0000 http://www.mechbox.com/?p=83#comment-646 Simular question to mills. I have an echo 1 scar. Any chance you will be doing a video on the take down of it for upgrading gearbox and new barrel? Simular question to mills. I have an echo 1 scar. Any chance you will be doing a video on the take down of it for upgrading gearbox and new barrel?

]]> By: mills http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-506 mills Sun, 09 Nov 2008 23:27:38 +0000 http://www.mechbox.com/?p=83#comment-506 Hey iam having problems gettting the gear box out of my echo 1 scar its a bit diffrent from the jls model. It striped a gear or something right after i bought it.anyone know anything about it? Hey iam having problems gettting the gear box out of my echo 1 scar its a bit diffrent from the jls model. It striped a gear or something right after i bought it.anyone know anything about it?

]]> By: sam http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-2#comment-420 sam Tue, 30 Sep 2008 18:40:07 +0000 http://www.mechbox.com/?p=83#comment-420 u should start doing basic hopup/barrel swap and upgrade videos such as replacing a bucking or installing a tightbore barrel too u should start doing basic hopup/barrel swap and upgrade videos such as replacing a bucking or installing a tightbore barrel too

]]> By: Douglas http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-1#comment-318 Douglas Mon, 25 Aug 2008 06:40:55 +0000 http://www.mechbox.com/?p=83#comment-318 How similar is this to the Classic Army brand SCAR? How similar is this to the Classic Army brand SCAR?

]]> By: Chris http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-1#comment-69 Chris Mon, 30 Jun 2008 03:02:02 +0000 http://www.mechbox.com/?p=83#comment-69 yeah I found just after leaving that comment. Sorry. I did a full breakdown hoping to unjam my weapon. But it still wont fire!!!!!!!! Any thoughts?!? yeah I found just after leaving that comment. Sorry. I did a full breakdown hoping to unjam my weapon. But it still wont fire!!!!!!!! Any thoughts?!?

]]> By: 6mm http://www.mechbox.com/scar/jls-scar-disassembly.html/comment-page-1#comment-68 6mm Sun, 29 Jun 2008 20:36:24 +0000 http://www.mechbox.com/?p=83#comment-68 Chris, did you do a search for M4? We have a couple videos on the M4/M733 and the V2 mechbox. <a href="http://www.mechbox.com/m4m16" rel="nofollow">http://www.mechbox.com/m4m16</a> Chris, did you do a search for M4? We have a couple videos on the M4/M733 and the V2 mechbox. http://www.mechbox.com/m4m16

]]>