Comments on: M14 Reassembly (AGM)

By: Andrew

Andrew — Tue, 06 Oct 2009 02:04:09 +0000

Wow thanks a ton this thing is soo complicated to take down.

By: R7

R7 — Sun, 17 May 2009 03:25:36 +0000

Hi tigersniper,
Before you put an upgraded spring in the gun (which may cause more wear and tear), I would check the airseal between the nozzle and bucking in the hop unit.
1- Does the nozzle move its totally forward movement into the bucking?
2- Are there any holes/ cracks in the air nozzle?
If these aren’t problems, then you probably left your spring compressed too long. I advise you to increase airseal even further (tighter inner barrel/ higher diameter bb, lubed inner barrel, teflon tape around bucking/ hop unit wherever air leaks/ airseal nozzle).
If you increase the airseal, you probably won’t have to move to a higher rated spring which means less durability in the long run! If you do all this, you should increase velocity by about 50- 75 fps.
R7

By: tigersniper

tigersniper — Mon, 16 Mar 2009 02:56:05 +0000

Hi 6mm! Great vid. help me a lot in my agm m14 upgrade project. Currently, i’m using guarder sp120, but when i chrono’d it last night, it was only averaging 106m/s. Compression test was great (without the air nozzle). What’s your suggestion? Everything else in the mechbox is upgraded, except for the stock motor and the mechbox itself.
can i put in an sp130 in it as well?

Thanks.

By: Jerey

Jerey — Sun, 25 Jan 2009 23:04:08 +0000

I love this website due to the fact im trying to upgrade an AGM M14. Can this question be answered?: does the Mp008 model have metal brushings and such for a M130- M140 spring?

By: Will

Will — Tue, 20 Jan 2009 23:34:26 +0000

I found the problem…it was hopup. Thank you.

By: 6mm

6mm — Wed, 31 Dec 2008 19:49:07 +0000

@ Will – Did you actually open the mechbox or just break the gun down? Most likely a hopup issue, but hard to say without knowing a little more.

By: Will

Will — Tue, 30 Dec 2008 21:51:14 +0000

Great video, but a quick question…after taking apart my cyma m14 I noticed a huge drop in range…it was going 50 ft. then dropping. Anyone help?

By: david

david — Sun, 05 Oct 2008 04:40:33 +0000

great assembly…any chance you can do a complete breakdown of the version 7 gearbox from this gun? i am having difficulty with the outer left side of the gearbox as is a lot of others that own this gun…keep up the good work!