Comments on: G36C Reassembly

By: aleksi

aleksi — Thu, 17 Dec 2009 19:27:40 +0000

and this is same gun than double eagle g36c?

By: matt

matt — Fri, 27 Nov 2009 22:38:45 +0000

Will i have to resolder the wires if i install a GP motor ont my JG G36c.

By: H4

H4 — Fri, 06 Nov 2009 22:55:06 +0000

I HAVE A JG36C AND IT HAS VERY SLOWE REACTION WHEN I PULL THE TRIGER THIS IS A NEW THING CAN U HELP WITH HOW 2 FIX.

By: airsoft

airsoft — Wed, 23 Sep 2009 05:04:50 +0000

I like this games, it’s exciting and very fun…
fire in the hole!!!

By: bent

bent — Sun, 23 Aug 2009 17:16:14 +0000

TM semi auto not working well after upgrades.
what can fix this?

By: Adam

Adam — Sun, 16 Aug 2009 01:21:11 +0000

Hi I was just wondering if you could make a video or tell me how to rewire the G36 to the back.

Thanks!

By: Ruben

Ruben — Sat, 15 Aug 2009 11:33:56 +0000

Hi
I have bought a JG G36C, and wonders if any1 can help me upgrade it? I have about 100$ i can spend on upgrades on http://www.gunnerairsoft.com and I want to upgrade it to about 450fps. It would also be nice if accuracy and rpm where increased, but 450 fps is my main goal. If somebody can tell me what to buy I would be very happy! And I think I manage to upgrade the gun if I watch the videos on the site. Please help:)

By: Greg

Greg — Tue, 23 Jun 2009 16:30:00 +0000

I am assuming that these procedures work on all G36 versions including the K version. Would that be correct or no? Why is there so much about the G36C, but so little about the G36K? I am considering buying a K version.

By: R7

R7 — Sun, 12 Apr 2009 03:23:35 +0000

Hey Bulldog_Belisle2,
1- Take a look at your hop bucking. Is it in prime condition? If it isn’t you may need to replace it. If it is the problem, your velocity will go up by ALOT!
2- Take a look at the Oring on your piston head. Is it snug inside the cylinder wall?
3- Is there anything obstructing the tappet plate’s way from moving to its forward position? If there is ANYTHING keeping it from being pulled all the way forward to the point of touching the mechbox case with its small spring, then you will have about 300 FPS LOSS.
4- Finally, take a look around the hop unit/ nozzle area where air might escape.
If all these are fine, there should be NO REASON for it not to fire really HOT!
R7

By: Tom

Tom — Sat, 28 Mar 2009 23:23:01 +0000

I sent you guys an e-mail over 2 months ago and still have not received a reply. Any reason?

By: Dave

Dave — Sun, 01 Mar 2009 02:45:09 +0000

Ken, it sounds like you tightened the motor base screw too much. try losening it up.

By: Bulldog_Belisle2

Bulldog_Belisle2 — Thu, 26 Feb 2009 16:44:42 +0000

I just bought a complete tune-up kits from Guarder w/150 for echo 1 G36c and I bought the motor to match with a lipo 11.1 4000 mah. Took it apartment and put it back to together. The velocity sucks, it’s not even shooting over 200 fps. I dont know what’s wrong. I rebuild guns all the time having a problem with this one. Had to modify a lot of parts to make fit Guarder part aren’t all compatible. Please help!

By: Joe

Joe — Sun, 22 Feb 2009 02:16:59 +0000

Yeah a guide on upgrading my jg g36c barrel would be great, because i plan on getting a 6.02mm barrel for it. and any basic maintenence suggestions or a guide would be great too. I just bought silicon oil and I have no clue what to do with it….=p

By: Ken

Ken — Sun, 01 Feb 2009 05:09:16 +0000

Hello, I have an SRC gearbox. when I have the gearbox alone outside of the lower receiver pistol grip, the gun works fine, and then as soon as I try and put the gun into the lower receiver the gun stops working, wont fire wont even turn over. has this happened to anybody before? and what is the cure? Three people have looked at it and they are all at a loss.

By: Drew

Drew — Fri, 02 Jan 2009 05:36:01 +0000

i was fixing my friends gearbox in his g36c,when i did i put the gearbox back in the pistol grip correctly and when i tried to put it back in the body just like the video and for some reason it just wont go down and its not the wires or anything blocking it but it just wont go down.your help would be greatly appreciated,thanks P.S. this is an echo1